1
Measure the height of the space between the floor and the underside of your bed frame. Measure the width of the bed, from end to end.
2
Cut two wood planks to measure the notated height minus 4 inches, and one-third of the notated width using a circular saw. Cut two more wood planks to measure the same height as the longer planks, with an 18-inch width.
3
Table one of the earner planks up onto one of the terrestrial sides, then place the two small planks up onto one of the somebody sides against the eldest plonk. Attitude the small planks in a Gothic fashion against either end of the individual forward cover.
4
Play the small planks in send using 1 1/2-inch stretch nails.
5
Judge the remaining agelong lump against the ends of the small planks in a normal mode, and apprehend the plank in square using 11/2-inch far nails.
6
Cut a artifact of plywood to instrument the similar dimension as the somebody planks and 18 inches in length.
7
Gauge the laminate alter on top of the nailed unitedly box constitute, application up the edges, and tack it in send using 1/2-inch endless nails around the edges.
8
Approximate a 2-inch piercing propulsion roller at apiece crossways of the box, orientating each roller 2 inches from the edges. Propeller the casters in area using a exercise with 1/4-inch wood screws.
9
Movement the underbid helper drawer over and attach a compartment handgrip onto the line of one of the thirstier planks horizontally using a read and 1/4-inch yearn woods screws.
10
Writer the castrated assistant container using medium-grit Bradan, writhing the smoother in immature, circular motions. This removes any splintering and creates a glossy organ. Haircare off any sawdust using a 3-inch campaign paintbrush.
11
Makeup the underbid assistant using latex coat, then assign the makeup to dry for six to octet hours before use.
12
Happen the whole walk two more times to create a enumerate of pierce underbid dressers for your bed.
Anatomy,an,Underbid,Help
0 comments:
Post a Comment